Level 20 VT横躺式强化玻璃机箱



*此图仅供参考。
承袭曜越企业使命“致力于创造完美的使用者经验”,秉持着对DIY创作及Modding改装的热忱、对产品品质的坚持以及追求全方位卓越创新的渴望,曜越创立了顶级产品“TT Premium”,并同时设计专属的识别标志,以「高级质感、独特设计、多样组合及无限创意」为四大核心价值来实现其理念,TT Premium顶级产品让使用者可提升系统性能并保持在最佳状态!

“Tt LCS Certified”水冷认证是曜越特地为专业级玩家打造高标准水冷等级的认证标志设计,凡是经过曜越专业测试可兼容的水冷散热系统,皆会给予此认证标志,我们的标准将会符合玩家对水冷系统的期待,并体现HARDCORE硬派极限风采的终极表现,“Tt LCS Certified”水冷认证确保曜越机箱具备优良散热效能以及高度水冷扩充性能!

Level 20 VT支持M-ATX主板,并可容纳CPU塔式散热器达185mm、高阶显卡长350mm及电源240mm的安装空间。上方更有足够空间容纳两个240mm或一个280mm水冷排,灵活完善的安装选择,让玩家能轻松打造出性能和散热效能兼具的水冷系统。

*此图仅供参考。
机箱內部提供最佳结构设计,上层具备足够的空间可让风流顺畅,除了提升散热效能也方便打造个人专属的美学设计;下层则可放置电源和提供方便的理线管理。
*此图仅供参考。
四面4mm厚度强化玻璃设计,不仅可保护PC內部硬件,也让水冷系统一览无遗,让玩家轻松充分展现自己的水冷系统安装,轻松打造个人的独特风格。
*此图仅供参考。
Level 20 VT前方标配一个200mm 风扇,前方有足够空间放置高达两个140mm风扇,后方一个140mm风扇。可支持280mm、240mm、140mm及120mm 的水冷排,让玩家轻松打造出最佳的散热系统。顶部磁吸式风扇滤网,前侧风扇滤网及底部滤网减少机箱内部灰尘堆积提供更好的通风散热系统。
*此图仅供参考。
Level 20 VT 具备两个 USB 3.0及两个USB 2.0埠,提供高效能传输速度。
Level 20 VT 水冷排兼容列表
|
|

|
|

型号 | CA-1L2-00S1WN-00 |
---|---|
系列 | LEVEL 20 系列 |
机种 | Level 20 VT |
机型 | Micro Case |
尺寸(高*宽*深) | 348 x 330 x 430 mm (13.7 x 13 x 16.9 inch) |
重量 | 8.66 kg / 19.09 lb |
侧窗 | 4mm Tempered Glass x 4(Left & Right & Front & Top) |
颜色 | Exterior & Interior : Black |
材质 | SPCC |
散热系统 | Front (intake) : 200 x 200 x 30 mm fan (800rpm, 13dBA) |
Drive Bays -Accessible -Hidden |
3.5’’ or 2.5” x 3 , 2.5’’ x 3 |
PCI插槽 | 5 |
适用主机板 | 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX) |
I/ O连接埠 | USB 3.0 x 2,USB 2.0 x 2, HD Audio x 1 |
电源供应器 | Standard PS2 PSU (optional) |
风扇支持 | Front: 2 x 120mm, 2 x 140mm, 1 x 200mm Top: 4 x 120mm, 2 x 140mm Rear: 1 x 120mm, 1 x 140mm Bottom: 2 x 120mm |
水冷排支援 | Front: 1 x 240mm, 1 x 140mm, 1 x 180mm(200mm series) Top: 2 x 240mm, 1 x 280mm, 1 x 180mm(200mm series) Rear: 1 x 120mm |
Clearance | CPU cooler height limitation: 185mm VGA length limitation: 350mm PSU length limitation: 200mm (With Bottom Fan) |
使用手册
- 档名
- 描述
- 尺寸
- Version
- Release Date

The stock configuration of the the Level 20 VT runs warm relative to the other cases we’ve tested. It’s a fairly large case to only include one fan, even if it is 200mm, and it could use an additional one. On the other hand, there’s decent radiator support, and liquid cooling could be used to lower temperatures with brute force for gaming.

The latest chassis from Thermaltake certainly gets a lot of things right. It falls into the same traps of other horizontal-form-factor mATX chassis I’ve seen in the past though. The cable routing, for example, isn’t perfect. There are no cable routing holes around the motherboard, and you simply pass cables around other parts of the chassis to reach. A few cable ties and a bit of effort can get good results though. Furthermore, a PSU with nice looking cables would go a very long way here, aesthetically speaking.
<More>
What is there to say really? This case was well-thought out and has a lot to offer. The amount of room inside is absolutely amazing and thanks to it dual chamber design, you will be able to hide most of the cables and others bits you may not want to have on view. This will leave you with a very clean looking build showcasing all your hardware. Those looking to go the water cooling route will be happy to know that you can fit a nice pair of 240mm/280mm radiators on the top. This should provide sufficient cooling for most components that will be installed but should it not, you can install another radiator onto the front and/or back for the extra cooling performance. Or, maybe you’d just prefer to go all out with fans? Well then, you can fit a total of 7x fans in this beast for maximum airflow and RGB! Cooling aside, there is also room for up to 3x 3.5″ HDD and 3x 2.5″ SSD or a total of 6x 2.5″ SSDs which should see most peoples storage needs to be met. Also, the location of the drive bays/caddies with help of the dual chamber design means that not only can you show off just the components you want but the airflow inside the case should be rather good.
<More>